Firmware Updates

Radian Series

Radian

NOTICE

Please ensure that you are downloading the correct version number. Each download contains a ReadMe text file that details the:

  • Firmware Version Number
  • Contents of the Release
  • Release Date
  • Additional useful information

Once downloaded, verify that the ReadMe text file contains the proper information regarding your Radian product. 

  • Version 001.006.067 for GS8048A and GS4048A (Puerto Rico only)
    • Contents of the Release: Enables grid support settings specific to PREPA
    • Release Date: August 2018
    • Additional Information: This update enables the GS8048A and GS4048A to load the new PREPZ1R2.GIP file which sets the inverter to the grid support settings required by the Puerto Rico Electric Power Authority. The ZIP file includes both the firmware and GIP files; be sure to update the firmware before attempting to load the GIP file. 
      NOTE: Inverters installed outside of Puerto Rico do not require this update. An update to this firmware version must be performed with a MATE3s system display with 001.003.001 firmware or greater..
  • Version 001.006.065 for GS7048E and GS3548E
    • Contents of the Release: Key new features
    • Release Date: February 2018
    • Additional Information: Implementation of AS4777 and ABNT 16149 Grid Support function. Note: The Grid Support functions listed below are only activate if tested and approved by the regulatory authority. Functions include Low and High Voltage Ride Through, Low and High Frequency Ride Through, Specified Power Factor (SPF), Soft-Start Ramp (SS) and Normal Ramp Rate (RR), Frequency-Watt (FW), Volt-Watt (VW), Volt/VAr (Q/V). Also instituted .GIP files for easier Grid Support limit programming, improved transfer time in UPS AC mode, improved accuracy of AC power reporting, and enhanced over-temperature protection. Note: Make certain to read the Operator's Manual as certain functions may have changed. An update to this firmware version must be performed with a MATE3s system display with 001.001.000 firmware or greater.
  • Version 001.006.063 for GS8048A and GS4048A
    • Contents of the Release: Key new features
    • Release Date: September 2017
    • Additional Information: Implementation of UL1741SA (with R:07Sep2016), California Rule 21, and updated HECO Grid Support function. These functions operate when the inverter is set to GridZero mode, if activated by loading a .GIP file or if changed manually. Functions include Low and High Voltage Ride Through, Low and High Frequency Ride Through, Specified Power Factor (SPF), Soft-Start Ramp (SS) and Normal Ramp Rate (RR), Frequency-Watt (FW), Volt-Watt (VW), Volt/VAr (Q/V). Also updated .GIP files for latest compliant Grid Support limit programming. Note: Make certain to read the Operator's Manual as certain functions may have changed.

Release Date

Wednesday, 17 October 2018

Address

Headquarters:
17825 59th Ave. NE, Suite B
Arlington, WA 98223 United States

Contact Info

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Phone: +1 360.435.6030

Fax: +1 360.435.6019