MX60 Inverter changes state

Discussion about the MX60 Charge Controller

Moderators: OutBack, OutBack Moderator Team

MX60 Inverter changes state

Postby ipfarrell on Mon Apr 13, 2015 7:13 pm

I have a Outback Power system with a solar array and battery backup. This system is also grid connected. It was installed in 2007.
For the last several years the system has been erratic in switching automatically from grid to batteries when the grid drops off.

In conjunction with the system suppliers I have determined that this occurs when the MX60 is not in the "On" state but has changed to "Off".

Despite significant investigation by the suppliers and shipping the inverter to their suppliers (and technical support), we have not been able to get to the bottom of this. The unit tests fine.

Has anybody else observed this behaviour?
ipfarrell
Junior Member
 
Posts: 1
Joined: Tue Apr 07, 2015 9:19 pm
My RE system: Mate 2, FX Inverter, Power Edge (grid connect), 4x12V Batteries, 8 solar panels

Return to MX60 Charge Controller

Who is online

Users browsing this forum: No registered users and 5 guests