mx-60 says "got battery?"

Discussion about the MX60 Charge Controller

Moderators: OutBack, OutBack Moderator Team

mx-60 says "got battery?"

Postby raysubtropical on Wed Jan 07, 2015 7:29 pm

I have an older charger configured for 48v system and wanted to put it to work on a 24v bank....i hooked everything up and it started charging the 24v bank normally.....a couple days later the 60 amp breaker had tripped.....that's when i learned about pressing key 1 and 3 at the same time during powering up....well i tried the button trick several times...got the full normal display with the old 48v displayed and then it kicks over to "got battery?"

any ideas floating out there on what to do next....? will certainly help ....thank you....
raysubtropical
Junior Member
 
Posts: 1
Joined: Wed Feb 05, 2014 12:22 pm
My RE system: 4kw panels, 3-zomeworks, 1-fx3524, 1-mx80, 2-xw-mppt60-150, 740amp-hr bank, 2-grundfos solar pumps....

Return to MX60 Charge Controller

Who is online

Users browsing this forum: Dotbot [crawler] and 4 guests