Firmware

Discussion about the MX60 Charge Controller

Moderators: OutBack, OutBack Moderator Team

Firmware

Postby pault on Sat Aug 30, 2014 9:21 am

How do I determine the firmware version? How do I update the firmware? Thanks, Paul
pault
Member
 
Posts: 19
Joined: Sun Feb 10, 2008 12:23 pm
Location: Alabama
My RE system: Currently 2 arrays, 1400W and 1440 watt, each with an MX60. VFX3524 inverter and 12 Trojan L16RE-B 6V batteries.

Re: Firmware

Postby Mike Curran on Tue May 03, 2016 8:58 am

I know this is an old post but if still interested, MX60 manual says "The software version can be viewed by pressing the #1 soft key on the STATUS screen and then pressing a second time and holding the soft key down."

FYI I tried this, my MX60 is revision 5.11.

Don't think you can update firmware yourself, if it's possible then probably requires return to Outback.
Mike Curran
OutBack Guru
 
Posts: 365
Joined: Sat Aug 28, 2004 6:28 pm
Location: Chagrin Falls, Ohio
My RE system: Outback:
- 8 (2x4) Evergreen 180's into one MX60
- 6 (2×3) ALEO S79-300's into one FM80
- 2 grid-tied GVFX3524's classic stacked for 120/240VAC
- 12 Surrette/Rolls 2V x 1766Ah
- Hub10.3, Mate3, FNDC, RTS, OpticsRE. Tigo Energy ES maximizers on each PV module.

Westinghouse Solar:
- 30 (2x15) 235W panels with Enphase M215 microinverters, grid-tied.

Re: Firmware

Postby ActualReverend on Fri Sep 23, 2016 9:41 am

pault wrote:How do I determine the firmware version? How do I update the firmware? Thanks, Paul


Out of curiosity, is there a change log? Is there a new feature you have learned about that you want/need? My firmware is about 10 years old now, curious what has changed.
ActualReverend
Member
 
Posts: 18
Joined: Wed Jan 03, 2007 8:15 am
Location: Flagstaff, AZ, USA

Re: Firmware

Postby EMCF on Fri Sep 23, 2016 10:49 am

REV 5.11 is actually the last firmware update for MX60.
EMCF
OutBack Expert
 
Posts: 57
Joined: Thu Jul 21, 2016 10:22 am
My RE system: FX3048, 4 200a batteries, FM60. 3 kw array


Return to MX60 Charge Controller

Who is online

Users browsing this forum: No registered users and 4 guests