Integration of system monitoring

Website & Forum Discussions
Check here for our Welcome Message

Moderators: administrator, OutBack, OutBack Moderator Team

Integration of system monitoring

Postby Lagarto888 on Fri Jan 04, 2019 5:10 pm

Hello everyone, new to the forum and mostly ignorant about solar systems. My vendor just recently completed my home installation which consists of a Radian 8K inverter, two Flex Mates 80, 32 Canadian Solar panels (355 each) and 12 Outback PLC200 Batteries. 8 of the panels are directly connected to the grid tied System with Enphase Micro Inverters, the remaining 26 panels all go to the Radian and the battery setup. Question, is there a way to integrate the monitoring of the two systems? I can now monitor through Enphase my Enlightment App and through the Optics Re app, but none of them will read the other.

Any thoughts and/or recommendations?

Thanks in advance,
Carlos
Lagarto888
Forum Junior Member
 
Posts: 2
Joined: Tue Nov 27, 2018 6:50 pm
My RE system: Radian 8048 - 12 PLC200 Batteries - 32 Canadian Solar 355 Panels - 8 enphase micro - DC Coupled and grid tied.

Re: Integration of system monitoring

Postby Lagarto888 on Fri Jan 11, 2019 5:32 pm

Bump!
Lagarto888
Forum Junior Member
 
Posts: 2
Joined: Tue Nov 27, 2018 6:50 pm
My RE system: Radian 8048 - 12 PLC200 Batteries - 32 Canadian Solar 355 Panels - 8 enphase micro - DC Coupled and grid tied.

Re: Integration of system monitoring

Postby Mike Curran on Sat Jan 12, 2019 8:57 am

Depends on what you want to monitor. You could put a whole house monitor at your main AC panel to monitor power in and out, but beyond something basic like that I don't think there's much more you can do.
http://www.tigoenergy.com/site.php?95b2dca2-ca6c
Mike Curran
Forum Czar
 
Posts: 918
Joined: Sat Aug 28, 2004 6:28 pm
Location: Chagrin Falls, Ohio
My RE system: Outback:
- 8 (2x4) Evergreen 180's into one MX60 (2007)
- 6 (2×3) ALEO S79-300's into one FM80 (2017)
- 2 grid-tied GVFX3524's classic stacked for 120/240VAC (2007)
- 12 Surrette/Rolls 2V x 1766Ah (2007)
- Hub10.3, Mate3, FNDC, RTS, OpticsRE. Tigo Energy ES maximizers on each PV module.

Westinghouse Solar: (2012)
- 30 (2x15) 235W panels with Enphase M215 microinverters, grid-tied.


Return to Website & Forum

Who is online

Users browsing this forum: No registered users and 4 guests