size / part number of DIN rails for DIN DC breaker

Discussion about the Power System PV Combiner (PSPV)

Moderators: OutBack Moderator Team, OutBack

Post Reply
judoal
Forum Whiz
Posts: 30
Joined: Tue Mar 24, 2009 3:24 pm
My RE system: 3 GVFX3648, 4 MX60, mate3s, 16 Crown AGM, 2 series strings in parallel, grid-tie
Location: Nederland, CO
Contact:

size / part number of DIN rails for DIN DC breaker

Post by judoal » Tue Mar 24, 2009 3:30 pm

Anyone know the size and/or part number for the DIN rail that holds the DIN DC breaker in the combiner box?

Thanks

User avatar
mvrck
Forum Czar
Posts: 615
Joined: Mon Oct 17, 2005 10:03 am
My RE system: 3.1 kW (BP 60W) on 2x MX60s
560W (Kaneka 60W) on 1 Classic 150
1080W (Day4) on 1 Tristar MPPT 60
GVFX3524 + PS2AC/DC, MATE, HUB4, Charles 24V 30A Charger, Generac S4001, Trimetric 2020, WattPlot, greenMonitor Lite, 400AH Bank (4 ea Rolls Surrette S530 Batteries), and a lot of other solar refuse...
Location: Austin, Texas
Contact:

Re: size / part number of DIN rails for DIN DC breaker

Post by mvrck » Wed Mar 25, 2009 6:57 pm

DIN Rail is more or less an industry standard. The breakers are made for 35mm x 7.5mm DIN Rail.
Maverick
 
¤ Off-Grid Renewable Energy Specialist
My Outback: 3kW PV STC + MX60s + GVFX3524 + PS2 Combo = Helping Myself to the Sun!

judoal
Forum Whiz
Posts: 30
Joined: Tue Mar 24, 2009 3:24 pm
My RE system: 3 GVFX3648, 4 MX60, mate3s, 16 Crown AGM, 2 series strings in parallel, grid-tie
Location: Nederland, CO
Contact:

Re: size / part number of DIN rails for DIN DC breaker

Post by judoal » Thu Mar 26, 2009 8:43 am

Many thanks. Since there are different DIN rail standards, I wanted to make sure. They are not listed in the Outback catalog. Do you know if they can be ordered through Outback? I have an older combiner that uses fuses and the plastic is falling apart so that there are only 6 of the original 12 circuits working. Since I need 6, there is no tolerance for additional failures. Consequently I want to rip out the board and put in the breakers. All the parts except the rails are listed in the Outback catalog.

Cheers

Post Reply