Warning - Bus to output difference too great

True Hybrid Energy System
Post Reply
AaronF
Forum Member
Posts: 14
Joined: Fri Apr 24, 2020 3:45 pm
My RE system: Skybox
Skybox RSI

Warning - Bus to output difference too great

Post by AaronF » Thu Jul 16, 2020 9:31 am

What does this message mean? The Skybox has been running for two weeks and this is the first time it has appeared.

Warning 2020/07/15 21:26
SC - Bus to output difference too great

Mike Curran
Forum Emperor
Posts: 1804
Joined: Sat Aug 28, 2004 6:28 pm
My RE system: Outback - Garage roof:
- 8 (2x4) Evergreen 180's into one FM80 (2007/2020 - replaced MX60)
- 6 (2×3) ALEO S79-300's into one FM80 (2017)
- 2 grid-tied GVFX3524's classic stacked for 120/240VAC (2007)
- 12 Surrette/Rolls 2V x 1766Ah (2007)
- Hub10.3, Mate3s, FNDC, RTS, OpticsRE. Tigo Energy ES maximizers on each PV module.

Westinghouse Solar - Barn roof: (2012)
- 30 (2x15) 235W panels with Enphase M215 microinverters, grid-tied

Outback Skybox - Barn roof: (2019)
- 14 Talesun 275W in series (DC array input to SB inverter/charger)
- 3 SimpliPhi 3.8 batteries, 48V, 225Ah total
- AC coupled input (manual switch during grid outage only) from 14 Talesun 275W,
Enphase M215 microinverters, normally direct grid tied

All self-designed and self-installed
Location: Chagrin Falls, Ohio

Re: Warning - Bus to output difference too great

Post by Mike Curran » Thu Jul 16, 2020 1:23 pm

Good question. OB has a ways to go to make the Skybox warning and error messages easy to interpret. Or at least issue a translator app.
http://www.tigoenergy.com/site.php?95b2dca2-ca6c
https://enlighten.enphaseenergy.com/public/systems/Hctc107221

raysun
Forum Emperor
Posts: 2998
Joined: Tue Jul 26, 2016 5:57 am
My RE system: Flexpower Two: (2) FXR3048A, (2) FM80, MATE3s, FlexNetDC
SimpliPhi 48-3.8 (6 @ 48v)
Outback IBR3 battery enclosure
Suniva 330 watt panels (12 - 6 strings of 2 in series)
Hyundai 355 watt panels (6 - 3 strings of 2 in series)
Honda EU7000is gas fuel generator

Re: Warning - Bus to output difference too great

Post by raysun » Thu Jul 16, 2020 2:07 pm

Mike Curran wrote:
Thu Jul 16, 2020 1:23 pm
Good question. OB has a ways to go to make the Skybox warning and error messages easy to interpret. Or at least issue a translator app.
A few weeks ago they demo'd the start of a Skybox - Human translator on their "Free Form Friday" webinar.

Mike Curran
Forum Emperor
Posts: 1804
Joined: Sat Aug 28, 2004 6:28 pm
My RE system: Outback - Garage roof:
- 8 (2x4) Evergreen 180's into one FM80 (2007/2020 - replaced MX60)
- 6 (2×3) ALEO S79-300's into one FM80 (2017)
- 2 grid-tied GVFX3524's classic stacked for 120/240VAC (2007)
- 12 Surrette/Rolls 2V x 1766Ah (2007)
- Hub10.3, Mate3s, FNDC, RTS, OpticsRE. Tigo Energy ES maximizers on each PV module.

Westinghouse Solar - Barn roof: (2012)
- 30 (2x15) 235W panels with Enphase M215 microinverters, grid-tied

Outback Skybox - Barn roof: (2019)
- 14 Talesun 275W in series (DC array input to SB inverter/charger)
- 3 SimpliPhi 3.8 batteries, 48V, 225Ah total
- AC coupled input (manual switch during grid outage only) from 14 Talesun 275W,
Enphase M215 microinverters, normally direct grid tied

All self-designed and self-installed
Location: Chagrin Falls, Ohio

Re: Warning - Bus to output difference too great

Post by Mike Curran » Thu Jul 16, 2020 4:18 pm

raysun wrote:
Thu Jul 16, 2020 2:07 pm
A few weeks ago they demo'd the start of a Skybox - Human translator on their "Free Form Friday" webinar.
I saw that - it was May 29th.
http://www.tigoenergy.com/site.php?95b2dca2-ca6c
https://enlighten.enphaseenergy.com/public/systems/Hctc107221

Post Reply