OpticeRE configuration save to text file.

Discussion about the OutBack OpticsRE system monitor

Moderators: OutBack, OutBack Moderator Team

Post Reply
Forum Junior Member
Posts: 1
Joined: Mon Jul 01, 2019 3:35 pm
My RE system: 7.6KW PV array size.
System voltage is 48v.
2 PV arrays with a combiner box.
1 inverter. GS8048A
2 150VDC Charge Controllers. FM80
System contains a large bank of 96 Aqion batteries.

OpticeRE configuration save to text file.

Post by imdaveim » Mon Jul 01, 2019 3:55 pm

I just joined the forum, and wondered if there are any plans to add a feature that
would allow me to save off the device configurations to a text file.
I searched a while on mine and didn't see that option.
Thanks -

User avatar
Kurt Lundquist
Alpha Energy Engineering
Posts: 1365
Joined: Tue May 31, 2011 7:23 am
My RE system: VFX3524, Mate3, 200Ah 24V AGM Battery Bank
Location: Arlington, WA

Re: OpticeRE configuration save to text file.

Post by Kurt Lundquist » Tue Jul 02, 2019 12:45 pm

Hi Dave,

This is a good idea. Next time you are in OpticsRE click on the bubble with the ? in the lower left hand corner of the screen. Up-vote the "Print Settings" request to add your voice to the mix.

In the mean time if you have a computer on the same subnet (loacl) to the Mate3 IP you can grab the settings with The IP address in red to the left needs to match whatever IP address you have on the Mate. Press the Port button on the Mate to see the IP if you don't know what it is. This doc has more info http://www.outbackpower.com/downloads/d ... ta_Use.pdf

Kurt Lundquist
Renewable Energy Project Engineer

Post Reply