optics RE REmote Access, and adjustments

Discussion about the OutBack OpticsRE system monitor

Moderators: OutBack, OutBack Moderator Team

optics RE REmote Access, and adjustments

Postby mike4t on Thu Sep 13, 2018 6:47 am

suddenly this statement has come up on a system, with no user input, but remotelynow cannot access the system fully,
"The gateway is under local control. Remote adjustment of attributes is disabled."

How did this happen and what is the meaning ??
How is it corrected,
thanks
mike4t
Forum Virtuoso
 
Posts: 84
Joined: Mon Apr 20, 2009 2:52 am
Location: Near Alicante Spain
My RE system:

Re: optics RE REmote Access, and adjustments

Postby Kurt Lundquist on Thu Sep 13, 2018 8:06 am

I think this message typically appears after someone presses the LOCK button on the Mate3. Once the Mate3 is back on the main screen I think the message is supposed to go away. Power cycling the Mate3 should fix it.

-Kurt
Kurt Lundquist
Renewable Energy Project Engineer
http://alphaenergy.us/
User avatar
Kurt Lundquist
Alpha Energy Engineering
 
Posts: 1326
Joined: Tue May 31, 2011 7:23 am
Location: Arlington, WA
My RE system:

Re: optics RE REmote Access, and adjustments

Postby djohnson on Thu Sep 13, 2018 8:07 am

User avatar
djohnson
OutBack Technical Service
 
Posts: 36
Joined: Wed Oct 19, 2016 12:06 pm
Location: Arlington, WA
My RE system:

Re: optics RE REmote Access, and adjustments

Postby mike4t on Thu Sep 13, 2018 9:23 am

Ok thanks both,
Mike
mike4t
Forum Virtuoso
 
Posts: 84
Joined: Mon Apr 20, 2009 2:52 am
Location: Near Alicante Spain
My RE system:


Return to OpticsRE

Who is online

Users browsing this forum: No registered users and 1 guest

cron