Page 1 of 1

12v output

Posted: Fri Feb 03, 2017 11:38 am
by Smclark59
Can I connect 12v water pump to the flex power 1?

Re: 12v output

Posted: Fri Feb 03, 2017 3:18 pm
by Sandra Herrera
The FP1 3.5Kw has a 24V inverter, getting 12V for a water pump is possible, but would have to be external to the Outback equipment

Re: 12v output

Posted: Sat Feb 04, 2017 2:27 am
by ltuss
If you have a 24 or 48 volt battery bank and a 12 vdc pump I would suggest you Google DC Converters. It is never good to draw off of 1 battery in a system it creates imbalances with in the battery bank.
If you have a dc pump you are not connecting it to the FP1 you are connecting it to the batteries.
This is a small point but it is best to clarify.