12v output

A place where users can meetup with other FlexPower One users and can find support for one another. A great place for people who have not purchased the FlexPower One yet to look up information.

12v output

Postby Smclark59 on Fri Feb 03, 2017 12:38 pm

Can I connect 12v water pump to the flex power 1?
Forum Member
Posts: 8
Joined: Tue Jan 24, 2017 9:16 am
My RE system: FlexPower 1 3.5kw, 2-300w solar world panels. generator backup

Re: 12v output

Postby Sandra Herrera on Fri Feb 03, 2017 4:18 pm

The FP1 3.5Kw has a 24V inverter, getting 12V for a water pump is possible, but would have to be external to the Outback equipment
Sandra Herrera
Applications Engineering

OutBack Power Technologies
User avatar
Sandra Herrera
OutBack Management
Posts: 202
Joined: Wed Jul 08, 2015 8:54 am
Location: Arlington, Washington

Re: 12v output

Postby ltuss on Sat Feb 04, 2017 3:27 am

If you have a 24 or 48 volt battery bank and a 12 vdc pump I would suggest you Google DC Converters. It is never good to draw off of 1 battery in a system it creates imbalances with in the battery bank.
If you have a dc pump you are not connecting it to the FP1 you are connecting it to the batteries.
This is a small point but it is best to clarify.
Lones Tuss
Applications Engineering

OutBack Power Technologies
Applications Engineering
Posts: 20
Joined: Wed Mar 16, 2011 10:27 am

Return to Flex Power One

Who is online

Users browsing this forum: No registered users and 1 guest