Discussion of OutBack Power Technologies Products
OutBack Support wrote:"You will need to make sure and put the same values on each controller/inverter on both systems. This ensures that each controller/inverter will produce the same information."
shelton wrote:Hi Andrew - I just got the AXS port installed at my house to test out before installing one on a customer. I am an installer but with experience with OpticsRE, Mate3 and original Mate. Not sure where to start to set up the AXS port but I really want to try out your product! What's the latest update on the AXS port programming via WattPlot? Do you have a tutorial for setting up the AXS port to use WattPlot?
pjrpd wrote:Can you confirm that the tool will download stored data from the AXS Port SD card after re-connection, in the case of an unstable internet connection.
pjrpd wrote:Re the WattPlot ACKcess tool. Can you confirm that the tool will down load stored data from the AXS Port SD card after re-connection, in the case of an unstable internet connection. If this happens, will the data download be automatic or manual.
My off grid system is relatively difficult to access, and our local internet backbone is being nationalised, meaning that people in my situation are suffering from degraded services. I should have intermittent communication, allowing downloading stored data.
intellect mistakenly wrote:Except that OutBack has removed the ability to set (or even read) the AXS Port clock, making it useless for logging past data.
Users browsing this forum: No registered users and 1 guest