Grid tie mode,Inverter mode,charger mode,GVFX3648

Post Reply
redspectrum
Forum Member
Posts: 8
Joined: Thu May 19, 2016 6:02 pm
My RE system: FX series inverter

Grid tie mode,Inverter mode,charger mode,GVFX3648

Post by redspectrum » Sun May 22, 2016 2:57 pm

New to modbus and programming the GVFX3648. Just wondering if someone could help he understand the settings in Block 2 for Grid tie mode, Invreter mode, charger mode, and AC drop use. The default setting is 0 for all of them just looking for info on these settings before I change them. I'm guessing that 0 is enable? Is there a list somewhere that has some info on the blocks and their settings?

Thanks,
redspectrum

User avatar
Sandra Herrera
OutBack Management
Posts: 202
Joined: Wed Jul 08, 2015 8:54 am
Location: Arlington, Washington

Re: Grid tie mode,Inverter mode,charger mode,GVFX3648

Post by Sandra Herrera » Tue Jun 07, 2016 11:19 am

Hello,
Take a look at this document, it might be helpful

http://outbackpower.com/downloads/docum ... p_note.pdf
Sandra Herrera
Applications Engineering


OutBack Power Technologies

Post Reply