AXS Port Connection Problem

AXS Port Connection Problem

Postby papageo10 on Thu Aug 09, 2018 12:17 am

We have installed an AXS port and configured with OPTIC RE before 2 months. In the past two months we came acrosss with several disconnections. The only way to reconnect the AXS port with OPTIC RE was with power reset. I configured a static ip and a reboot interval of 4 hours. I have also update the firmware to the latest (3.15.1). Is there a solution to fix the problem?
papageo10
Forum Junior Member
 
Posts: 1
Joined: Thu Aug 09, 2018 12:07 am
My RE system: AXS Port
FM 60
VFXR3024E
1,6kWp Solarworld 260Wp

Re: AXS Port Connection Problem

Postby dluu13 on Fri Aug 10, 2018 2:02 pm

I had an issue like that where AXS port would keep disconnecting as well. If you are using a WiFi dongle, it is possible that there is some problem between the connection of the WiFi dongle, AXS port, and router. I don't know where for certain.
I could reset the disconnection either by power cycling, or by disconnecting and reconnecting the ethernet port.

For me, what got rid of disconnections was to wire the AXS port directly to my router with ethernet cable rather than using a WiFi dongle. Since I did that, I have not had a single disconnection.
dluu13
Forum Junior Member
 
Posts: 3
Joined: Thu Jun 28, 2018 5:56 am
My RE system: 2x flexmax80
HUB4
AXS Port


Return to AXS Port

Who is online

Users browsing this forum: No registered users and 1 guest