Generator line on LCD disappeared

Mate3 and Mate3s communications devices for Outback Power

Generator line on LCD disappeared

Postby James Wilson on Sun Oct 08, 2017 10:52 am

A couple of weeks ago the fourth line (G) disappeared on my display. The fifth (bottom line) works normally.

I also noticed that the generator icon on the Opticsre site has gone grey, but the red dots and wattage display normally and the generator runs the house and charges the batteries.

I hadn't changed anything but I did notice that something had been gnawing on the cable connecting the MATE3 and display so I replaced it.

I've been through the menus, but haven't figured out how to get this line back.

There are so many details - firmware levels, how my system is connected, etc. that I'm not including all of them, but will answer any questions that will help get this working again.

James Wilson
Junior Member
Posts: 1
Joined: Tue Jul 15, 2008 11:24 am
My RE system: 4 - Sharp ND-167U3A 167 Watt solar panels
8 - Sharp ND-162U1 162 Watt solar panels
1 - Outback MX60 Charge controller
1 - Trace 4024 Inverter

Return to Mate3 / Mate3s

Who is online

Users browsing this forum: No registered users and 4 guests