Connect to Mate 3

Mate 3 communication device for Outback Power

Connect to Mate 3

Postby jeffminsc on Fri May 19, 2017 8:58 am

I have my system connected to Optics RE but can not for the life of me figure out how to connect directly to the mate 3. What am I missing. or can I not do that?
jeffminsc
Junior Member
 
Posts: 2
Joined: Mon May 15, 2017 1:04 am
My RE system: 4 flexmax 80 charge controlers
1 mate 3
1 flex net dc
1 VFXR2812A inverter

Re: Connect to Mate 3

Postby Mike Curran on Fri May 19, 2017 4:37 pm

In OpticsRE dashboard click on "Device map" then click on "Gateway device Mate3" at the right side of the screen above your other numbered device icons.

Hope this helps.
Mike Curran
OutBack Guru
 
Posts: 117
Joined: Sat Aug 28, 2004 6:28 pm
Location: Chagrin Falls, Ohio
My RE system: Outback: 8 (2x4) Evergreen 180's into one MX60, 6 (2×3) ALEO S79-300's into one FM80, 2 grid-tied GVFX3524's classic stacked for 120/240VAC, 12 Surrette/Rolls 2V x 1766Ah, Hub10.3, Mate3, FNDC, RTS, OpticsRE. Tigo Energy ES maximizers on each PV module.

Westinghouse Solar: 30 (2x15) 235W panels with Enphase M215 microinverters. 6,450 nameplate watts AC, grid-tied.

Re: Connect to Mate 3

Postby jeffminsc on Mon May 22, 2017 6:30 am

Guess I was not clear in my description. I would like to hook up to my system with out going through Optic Re. I thought there was a way to have a network without going through the internet. Thanks for the reply.
jeffminsc
Junior Member
 
Posts: 2
Joined: Mon May 15, 2017 1:04 am
My RE system: 4 flexmax 80 charge controlers
1 mate 3
1 flex net dc
1 VFXR2812A inverter

Re: Connect to Mate 3

Postby OffgridHiker on Mon May 22, 2017 4:19 pm

Enter your MATE3 local IP address while on your local network and you should see a web page.
OffgridHiker
OutBack Whiz
 
Posts: 27
Joined: Fri Nov 18, 2016 6:12 pm
My RE system: Offgrid

Solar / AC Generator
FM60
FX60
2x VFX3648
FNDC
MATE3
HUB10


Return to Mate3

Who is online

Users browsing this forum: No registered users and 2 guests