Monitormate Linux

Mate3 and Mate3s communications devices for Outback Power
Post Reply
electronbaby
Forum Junior Member
Posts: 2
Joined: Wed Feb 17, 2016 12:01 pm
My RE system: 2x GVFX3648 @ 48vdc (off-grid)
2x MX60 (mainly for DC gensets)
2x Midnite Classic (networked)
4.5 Kw PV (ground mount, and two wattsun trackers)
1.8 Kw axial flux turbine on 136' tilt tower
800Ah @ 48vdc (Deka 24-D85-17)
Listeroid 6/1 Axial Flux DC genset
Pentametric, FNDC
Mate3
Location: WI

Monitormate Linux

Post by electronbaby » Fri Mar 04, 2016 1:26 pm

Is anyone still using, or doing development on the Monitormate code as is seen here: viewtopic.php?f=39&t=7398

I cant seem to get it running properly (admittedly im trying to get more familiar with Raspbian)

anyone??



RoyR
Roy Rakobitsch
Windsine

timmartin
Forum Guru
Posts: 278
Joined: Thu Dec 02, 2010 8:31 am
My RE system: ...
Sharp 120W Panels (12)
SunPerfect 230W Panels (9)
Whisper 100 Wind Turbine
Outback FM60 charge controller
Outback FM80 charge controller
Outback VFX3648 inverter/chargers (2)
Outback FlexNet DC
CALB CA400 LiFePO4 3.2V batteries
(32 cells paired together, 1 string = 51.2V 800Ah)

Re: Monitormate Linux

Post by timmartin » Sun Mar 27, 2016 9:07 pm

Yea.. My version of that is still under active development. There were github links in that thread you referenced.

chinezbrun
Forum Virtuoso
Posts: 96
Joined: Tue Dec 26, 2017 10:52 am
My RE system: 5250W - 2 strings 12x250w, 9 X 250w
FlexMax 60, FlexMax 80
VFXR3048E (2 stacked)
48V 400A - TAB 3 EPZS 375L 2V
MATE3S
MonitorMate, OpticsRE
Location: Romania

Re: Monitormate Linux

Post by chinezbrun » Thu Feb 08, 2018 3:06 pm

I download the matemonitoring from https://github.com/instanttim/MonitorMate

My configuration:
FXRV3048E
FlexMax60
Hub
Mate3
windows 10
Web server : Synology/ Apache 2.2/PHP5.6
Database:PHPMyAdmin/MariaDB

I have some difficulties to make them full running. I read again and again the instruction but i'm stacked.
Web:
Config tab - graph are ok, but left side gauges are not working - i suppose that GetStatus.PHP is not working..
Details tab - not updated
History tab - ok
PHPMyAdmin: Database is updated

Is anybody that achieve full functionality as per example below:
http://finleyridge.com/power/current.php

Thanks,
Dan

timmartin
Forum Guru
Posts: 278
Joined: Thu Dec 02, 2010 8:31 am
My RE system: ...
Sharp 120W Panels (12)
SunPerfect 230W Panels (9)
Whisper 100 Wind Turbine
Outback FM60 charge controller
Outback FM80 charge controller
Outback VFX3648 inverter/chargers (2)
Outback FlexNet DC
CALB CA400 LiFePO4 3.2V batteries
(32 cells paired together, 1 string = 51.2V 800Ah)

Re: Monitormate Linux

Post by timmartin » Thu Feb 08, 2018 4:54 pm

Hi Dan,

You can send me the URL to your installation (Private Message perhaps?) and I can look to see what's going on. If I had to guess, I'd say your web server doesn't have write permission to the data directory. The graphs and charts are built off the SQL data, but the live view data is read from the JSON that's laid down on disk with every update from the host.

Let me know, I'm happy to help.

chinezbrun
Forum Virtuoso
Posts: 96
Joined: Tue Dec 26, 2017 10:52 am
My RE system: 5250W - 2 strings 12x250w, 9 X 250w
FlexMax 60, FlexMax 80
VFXR3048E (2 stacked)
48V 400A - TAB 3 EPZS 375L 2V
MATE3S
MonitorMate, OpticsRE
Location: Romania

Re: Monitormate Linux

Post by chinezbrun » Fri Feb 09, 2018 11:59 pm

Thnaks for reply.

WEB server write permision on data is granted.
post_datastream.php - is posting both JSON see below:

1. Status.JSON
{"time":{"relay_local_time":"2018-02-10T08:58:13+01:00","server_local_time":"2018-02-10T09:58:15+02:00"},"devices":{"3":{"address":4,"device_id":3,"charge_current":18.8,"pv_current":16,"pv_voltage":67,"daily_kwh":1.5,"aux_mode":"Float","error_modes":["None"],"charge_mode":"Absorb","battery_voltage":57.6,"daily_ah":27,"label":"FlexMax60"},"0":{"label":"FXRV3048"},"1":{"label":null},"2":{"label":null}},"summary":{"date":"2018-02-10","kwh_in":1.5,"kwh_out":0,"ah_in":27,"ah_out":0,"max_temp":null,"min_temp":null,"min_soc":0,"max_soc":null,"max_pv_voltage":null}}

2. datastream.JSON
{"time":{"relay_local_time":"2018-02-10T08:57:59+01:00"},"devices":{"3":"04,3,00,19,16,068,015,02,06,000,03,576,0027,00"},"extra_data":{"5":"5,02,06,"}}

Details page -> not updated
History page -> OK
current page -> values on charts are ok, left gauges are not updated

I send you the URL on private.

Thanks,
Dan

Post Reply