FNDC SOC

An area for discussing the OutBack FLEXnet DC product.

Moderators: OutBack Moderator Team, OutBack

FNDC SOC

Postby Jeffrey on Sun Dec 10, 2017 12:31 pm

My FNDC SOC stays at 100% and mate3 says ah out is zero. Also DC in light on master inverter is off.
Jeffrey
Forum Junior Member
 
Posts: 3
Joined: Sun Dec 10, 2017 12:03 pm
My RE system: 4 3048 inverters with two 4 Kw arrays and 2 flexmax 80 charge controllers, off grid with 15KW ecogen generator.

Re: FNDC SOC

Postby jguzman on Sun Dec 10, 2017 2:24 pm

Hello Jefferey,

DC IN light sounds like your surge protector. The light will not illuminate if there is no DC voltage detected from your batteries which explains why your master is turned off. Check for tripped breakers and measure voltage directly at the Inverters DC terminals.

Jorge
Jorge Guzman
Technical Support Supervisor


Watch easy to follow video tutorials:
https://www.youtube.com/c/wattschool
jguzman
Applications Engineering
 
Posts: 169
Joined: Thu May 29, 2014 9:44 am
Location: Arlington, WA
My RE system: GVFX3524, FM80, MATE3. 3x 260W REC. 4x Trojan L16 FLA 370Ah.


Return to FLEXnet DC

Who is online

Users browsing this forum: No registered users and 1 guest