Flex Power One AND Mate 3

OutBack's newest innovation in balance-of-system components

Moderators: OutBack Moderator Team, OutBack

Flex Power One AND Mate 3

Postby SEYLIONE on Sat Mar 24, 2012 7:58 am

Hello Colleagues,

I am buying a Flex Power 1-34. The doc features only a Mate 1 or 2. What about Mate 3?

Off Grid high (5 700ft) in the French Alps,
1kWp flat on my roof -24° from South, slope 80%
40 kWh C120 batteries
Flex Power 1-34 (FlexMax 60, GVFX3024E converter charger, FlexNet DC)

Thanks for any tip
User avatar
Forum Guru
Posts: 115
Joined: Thu Mar 22, 2012 9:16 am
Location: Serre-Chevalier, France
My RE system: Off grid house in the southern french Alps 1740m above sea
level. Commissioned 1st Jul 2012.

4 Bosch 245Wp Panels, 12 OPzS 2V 1 220Ah batteries
Management by OutbackPower: FP1-34 including:
FlexMax 80 Charger, GVFX3024E Converter-charger,
FlexNet DC, Hub, Mate3.

Monitoring every 3 hours over Internet (lsdx.eu/GPV_ZSDX)
by 3G managed by a local microcomputer and router.

Re: Flex Power One AND Mate 3

Postby tallgirl on Sun Mar 25, 2012 5:14 pm

All those parts are supported by the Mate 3.

Remember that with "packages" often the person making the "package" had their own ideas about what was going to be in the "package".
Julie in Texas

I ride bicycles. A lot.
User avatar
Forum Emperor
Posts: 4334
Joined: Wed Sep 26, 2007 9:59 am
Location: Austin, TX
My RE system: 16 Kyocera KC175GT (2,800 watts DC), MX-60, 2 OutBack GVFX3648, 8 GC2 batteries (6v @ 215AH),

Re: Flex Power One AND Mate 3

Postby SteveHiggins on Mon Mar 26, 2012 6:23 am

If you want the MATE3 with the FP1 you can order it with it.. Talk to your dealer or distributor.
Steve Higgins
Technical Services Director- Surrette Battery Company

Forum Czar
Posts: 567
Joined: Thu Mar 03, 2005 3:43 pm
Location: Seattle

Return to FLEXware

Who is online

Users browsing this forum: No registered users and 2 guests