PSX-240 Wiring

OutBack's newest innovation in balance-of-system components

Moderators: OutBack, OutBack Moderator Team

PSX-240 Wiring

Postby JCO on Mon Feb 20, 2012 5:40 pm

Greetings.
I recently purchased a PSX-240 for the step-up to 240 VAC feature. After combing through the manual, this and several other forums, I have been unable to find any clear wiring diagrams that show how to wire the two FX3048MT 120VAC outputs to the transformer.
Suggestions?
JCO
Member
 
Posts: 5
Joined: Mon Feb 21, 2011 1:54 pm
My RE system: 2 x FX 3048MT, Flexmax 60, Flex 500 AC/DC cabinets & mount, PSX-240 Autotransformer, Hub, Mate, 6 x Kyocera 210W panels, Air 403-48, 20pc Sterling 140 Ah AGM batteries, 48V off-grid system.

Re: PSX-240 Wiring

Postby Kent Osterberg on Mon Feb 20, 2012 7:55 pm

Kent Osterberg
OutBack Emperor
 
Posts: 1494
Joined: Mon Jun 09, 2003 11:01 pm
Location: Cove, Oregon
My RE system: SMA Sunny Boy 2500 with eight Mobil Solar Ra 180 modules

Re: PSX-240 Wiring

Postby SteveHiggins on Tue Feb 21, 2012 7:05 am

The wiring depends on what your are trying to do... ?

Are you Outback Stacking?
Steve Higgins
Technical Services Director- Surrette Battery Company

\
SteveHiggins
OutBack Czar
 
Posts: 567
Joined: Thu Mar 03, 2005 3:43 pm
Location: Seattle

Re: PSX-240 Wiring

Postby JCO on Wed Feb 22, 2012 6:48 pm

Kent;
Thanks for the manual link.
Steve;
I am attempting "series/parallel stacking, PSX-240 included" as described in the FX Series Manual. The thing that has thrown me was going from the X-240 to the PSX-240, where the instructions in the PSX-240 manual are somewhat obfuscating to my poor ol' brain, so please excuse my confusion. In looking again at the instructions of the FW-IOB-D-120/240VAC, I find a better representation of how to hook up the PSX-240:

http://www.outbackpower.com/pdf/wiring_ ... _REV_A.pdf

I reckon the intent of this forum is information sharing, so anyone else searching as I am can find expert answers within these threads. Any further references are most appreciated.
Cheers;
Clive
JCO
Member
 
Posts: 5
Joined: Mon Feb 21, 2011 1:54 pm
My RE system: 2 x FX 3048MT, Flexmax 60, Flex 500 AC/DC cabinets & mount, PSX-240 Autotransformer, Hub, Mate, 6 x Kyocera 210W panels, Air 403-48, 20pc Sterling 140 Ah AGM batteries, 48V off-grid system.

Re: PSX-240 Wiring

Postby Kent Osterberg on Wed Feb 22, 2012 8:39 pm

Clive,

The drawing you linked to is easier to follow and it is just what you need for an "Outback Stacked" pair.
Kent Osterberg
OutBack Emperor
 
Posts: 1494
Joined: Mon Jun 09, 2003 11:01 pm
Location: Cove, Oregon
My RE system: SMA Sunny Boy 2500 with eight Mobil Solar Ra 180 modules


Return to FLEXware

Who is online

Users browsing this forum: No registered users and 1 guest

cron