Solid red light PS1 6 KW MX60

A place to post images of your OutBack Power System

Moderators: OutBack, OutBack Moderator Team

Post Reply
Duffys278
Forum Junior Member
Posts: 2
Joined: Fri Dec 27, 2019 3:10 am
My RE system: PS 1 6KW MX 60 Outback Power System

Solid red light PS1 6 KW MX60

Post by Duffys278 » Fri Dec 27, 2019 3:53 am

Does any know what the error code means? E000 112 S0/6 G0/7 C0/1 #10 Day#361 15:30:01
Fixed red light but restart okay on non urgent error section. First time happened volts were high at 57.8 ,i then cleaned terminals which had blue stuff on them and the main positive lead in terminal on either end of battery had crysalised product that needed chopping of. It was not noticeable because under the terminal boots. 16 batteries for 48 volts. After cleaning terminals volts have dropped back to 55.2 during daylight charging but have still had error red light happening.
Do i need to shut system down and thoroughly clean terminal connectors to remove any trace of foreign matter inside terminal boots?

Mike Curran
Forum Emperor
Posts: 1564
Joined: Sat Aug 28, 2004 6:28 pm
My RE system: Outback - Garage roof:
- 8 (2x4) Evergreen 180's into one FM80 (2007/2020 repl'd MX60)
- 6 (2×3) ALEO S79-300's into one FM80 (2017)
- 2 grid-tied GVFX3524's classic stacked for 120/240VAC (2007)
- 12 Surrette/Rolls 2V x 1766Ah (2007)
- Hub10.3, Mate3s, FNDC, RTS, OpticsRE. Tigo Energy ES maximizers on each PV module.

Westinghouse Solar - Barn roof: (2012)
- 30 (2x15) 235W panels with Enphase M215 microinverters, grid-tied, no longer AC- coupled

Outback Skybox - Barn roof: (2019)
- 14 (2x7) Talesun 275W (DC array input to SB charger)
- 3 SimpliPhi 3.8 batteries, 48V, 225Ah total
- AC coupled input from 14 Talesun 275W, Enphase M215 modules

All self-designed and self-installed
Location: Chagrin Falls, Ohio

Re: Solid red light PS1 6 KW MX60

Post by Mike Curran » Fri Dec 27, 2019 2:18 pm

Check out this thread, sounds similar to your experience: http://outbackpower.com/forum/viewtopic.php?t=4228
http://www.tigoenergy.com/site.php?95b2dca2-ca6c
https://enlighten.enphaseenergy.com/public/systems/Hctc107221

Duffys278
Forum Junior Member
Posts: 2
Joined: Fri Dec 27, 2019 3:10 am
My RE system: PS 1 6KW MX 60 Outback Power System

Re: Solid red light PS1 6 KW MX60

Post by Duffys278 » Mon Dec 30, 2019 8:56 pm

Yea thanks Mike, ours little different as it turns itself back on after shutdown, we just reset to remove error but just trying to find out what the cause is?

User avatar
IanMcCluskey
OutBack Product Management
Posts: 154
Joined: Tue Aug 28, 2018 1:16 pm

Re: Solid red light PS1 6 KW MX60

Post by IanMcCluskey » Thu Jan 02, 2020 10:07 am

Hello, Duffys,

What device and firmware version does that error code appear on, please?
Ian McCluskey
Product Manager


Alpha Technologies Inc. / OutBack Power Technologies
3767 Alpha Way Bellingham WA 98226 USA
http://www.alpha.com

Post Reply