Saharan Dust

A place to post images of your OutBack Power System

Moderators: OutBack, OutBack Moderator Team

Post Reply
User avatar
EA6LE-ONE
Forum Guru
Posts: 151
Joined: Tue May 05, 2020 7:51 am
My RE system: System 1:
MATE3s, 3 x Radian GS8048A,
4 x FLEXmax 100, HUB10,
2 x EnergyCell 48V 2700RE,
1 x FLEXnet DC, 4 x FLEXware ICS Plus,
54 x PANASONIC VBHN325SA17 325W

System 2:
MATE3s, 2 x VFX3648,
2 x FLEXmax 100, HUB10
1 x EnergyCell 48V 2700RE,
1 x FLEXnet DC, 2 x FLEXware ICS
21 x PANASONIC VBHN325SA17 325W
Location: Providenciales, Turks & Caicos Isl.

Saharan Dust

Post by EA6LE-ONE » Tue Jun 23, 2020 6:04 am

Yesterday afternoon we've been hit by the Saharan dust and everything is hazy today. The solar output is lower right now and I will try to post in the next days a shot of the power generation for general info.


This is picture of the sun this morning:
Saharan Dust.jpg
Here is a live view of my webcam:
https://www.youtube.com/watch?v=7YXohJb ... e=youtu.be

SandyP
Forum Guru
Posts: 404
Joined: Tue Jun 21, 2011 4:44 am
My RE system: 8 x 190W 24V Suntech panels (4 strings of 2) July 2011
4 x 325W 24V Suntech panels (2 strings of 2) added Sept2018
Mate2
Outback FM60 MPPT (max output lowered to 55amps)
12 x 2V Hoppecke GEL 660 Ah C100 - 24V System
Outback VFX3024 Inverter/Charger
Victron BMV-602s
Honda 5.5kW Genset
Location: Victoria, Australia

Re: Saharan Dust

Post by SandyP » Tue Jun 23, 2020 6:08 am

EA6LE-ONE wrote:
Tue Jun 23, 2020 6:04 am
Yesterday afternoon we've been hit by the Saharan dust and everything is hazy today. The solar output is lower right now ../..
Found a similar issue with the bushfires in Australia in December, at least a 50% drop in solar output due to smoke.

raysun
Forum Emperor
Posts: 2309
Joined: Tue Jul 26, 2016 5:57 am
My RE system: Flexpower One: FX3048T, (2) FM80, MATE3s, FlexNetDC
Outback 200NC batteries (8 @ 48v)
Outback IBR3 battery enclosure
Suniva 330 watt panels (12 - 6 strings of 2 in series)
Hyundai 355 watt panels (6 - 3 strings of 2 in series)
Honda EU7000is gas fuel generator

Re: Saharan Dust

Post by raysun » Tue Jun 23, 2020 10:14 am

Two years ago, Kilauea volcano erupted and we had 100 straight days of fine particulate matter in the air. Solar harvest was attenuated 35% overall, with some days as much as 90%.

JRHill
Forum Czar
Posts: 866
Joined: Thu Feb 17, 2011 11:12 am

Re: Saharan Dust

Post by JRHill » Tue Jun 23, 2020 11:44 am

The fire in the Columbia Gorge a few years back was terrible. It was started by a kid who threw a smoke bomb down a draw on a hiking trail. In the end huge amounts of forest land was torched in OR and WA (crossed the Columbia), many homes lost and a few lives as well. Many days the sun was blocked out like in your picture. It stunk, literally. Solar was way reduced like rayson mentioned during that eruption. Our livestock suffered. To blow your nose was scary. Fire fighting resources were stressed for anything else.

Anyway I hope your thing blows by soon. Doesn't it suck to wear a mask at home?

User avatar
EA6LE-ONE
Forum Guru
Posts: 151
Joined: Tue May 05, 2020 7:51 am
My RE system: System 1:
MATE3s, 3 x Radian GS8048A,
4 x FLEXmax 100, HUB10,
2 x EnergyCell 48V 2700RE,
1 x FLEXnet DC, 4 x FLEXware ICS Plus,
54 x PANASONIC VBHN325SA17 325W

System 2:
MATE3s, 2 x VFX3648,
2 x FLEXmax 100, HUB10
1 x EnergyCell 48V 2700RE,
1 x FLEXnet DC, 2 x FLEXware ICS
21 x PANASONIC VBHN325SA17 325W
Location: Providenciales, Turks & Caicos Isl.

Re: Saharan Dust

Post by EA6LE-ONE » Tue Jun 23, 2020 12:10 pm

The air quality is not bad. The sand is more at the high altitude, some coming down and we have low visibility at about 1/2 mile. The solar production is kinda OK, maybe about 10% off. I think there is some indirect sunlight reflected by the dust that hits the panels as well. Don't see any deposit of dust on the panels yet. I will report in the next days with the experience.

User avatar
Heimhenge
Forum Guru
Posts: 119
Joined: Sun Jan 26, 2020 10:28 am
My RE system: 9 CSUN 390W panels for 3.51 kW
UniStrut PV rack on a flat roof
Midnight Solar MNPV3 combiner box w/ breakers
Outback Radian GS4048A-01 inverter
Outback FM100 charge controller
Outback FLEXnet DC monitor
Outback MATE3s system controller
Outback Hub
Trace DC breaker and shunt box
Lifeline GPL-8DL x4 = 12.2 kWh @ 48 volts
Running OpticsRE since March 2020
Location: 30 miles north of Phoenix @ elevation 2200 ft

Re: Saharan Dust

Post by Heimhenge » Fri Jun 26, 2020 1:14 pm

That Saharan dust plume isn't projected to get this far west. But I have seen reduced output, maybe 10% or so, because of smoke from wildfires. Several are burning in Arizona as I write. Recently saw a forecast from NWS that uses one of their new updated icon set. We've dealt with wildfires before, but this is the first time I've seen "areas smoke" in our forecast!
forecast.jpg

fcwlp
Forum Guru
Posts: 352
Joined: Wed Jan 22, 2020 9:40 am
My RE system: GS8048A, FM80 w/3,600 W PV Fixed, FM80 w/2,700W on Zomeworks tracker, Mate3, 24 Trojan 2V L16 1100AH @ C20, Grid-Tied with Kohler 14RESA LPG Generator and MEP-803 Diesel if needed
I also install and maintain grid-tied and off-grid systems, details will be given for these system if required
Location: 80 miles NE of Phoenix at 5500'

Re: Saharan Dust

Post by fcwlp » Fri Jun 26, 2020 4:28 pm

We were in the SAZ (Smoke Affected Zone) for ten days of the Bush Fire (190,000 acres and almost out) that was about 20 miles downwind of us. Visibility in the afternoon was typically 1/2 mile. Solar output was reduced ~10-15%.

Mike Curran
Forum Emperor
Posts: 1586
Joined: Sat Aug 28, 2004 6:28 pm
My RE system: Outback - Garage roof:
- 8 (2x4) Evergreen 180's into one FM80 (2007/2020 repl'd MX60)
- 6 (2×3) ALEO S79-300's into one FM80 (2017)
- 2 grid-tied GVFX3524's classic stacked for 120/240VAC (2007)
- 12 Surrette/Rolls 2V x 1766Ah (2007)
- Hub10.3, Mate3s, FNDC, RTS, OpticsRE. Tigo Energy ES maximizers on each PV module.

Westinghouse Solar - Barn roof: (2012)
- 30 (2x15) 235W panels with Enphase M215 microinverters, grid-tied, no longer AC- coupled

Outback Skybox - Barn roof: (2019)
- 14 (2x7) Talesun 275W (DC array input to SB charger)
- 3 SimpliPhi 3.8 batteries, 48V, 225Ah total
- AC coupled input from 14 Talesun 275W, Enphase M215 modules

All self-designed and self-installed
Location: Chagrin Falls, Ohio

Re: Saharan Dust

Post by Mike Curran » Sun Jun 28, 2020 8:09 am

Article about it in my daily paper today: http://plaindealer-oh.newsmemory.com/?publink=0e5f6341e
http://www.tigoenergy.com/site.php?95b2dca2-ca6c
https://enlighten.enphaseenergy.com/public/systems/Hctc107221

Post Reply