Array addition photo

A place to post images of your OutBack Power System

Moderators: OutBack Moderator Team, OutBack

Array addition photo

Postby Mike Curran on Tue Jun 06, 2017 8:44 am

Just added an 1800 watt array (2×3 Aleo 300's) plus an FM80 charge controller to my Outback system. Went in service May 13, 2017. Photo shows new array on lower portion of roof; upper array (2×4 Evergreen 180's) was installed in October, 2007. All modules in these photos have Tigo Energy ES module maximizers - I have some intermittent shading issues with nearby trees. Unirac mounting systems on both arrays. I adjust the upper array tilt angle around the equinoxes (shown in spring/summer position), so twice yearly. Lower array is fixed.

FB_IMG_1496760253740.jpg
Attachments
FB_IMG_1496760269767.jpg
Mike Curran
OutBack Guru
 
Posts: 146
Joined: Sat Aug 28, 2004 6:28 pm
Location: Chagrin Falls, Ohio
My RE system: Outback: 8 (2x4) Evergreen 180's into one MX60, 6 (2×3) ALEO S79-300's into one FM80, 2 grid-tied GVFX3524's classic stacked for 120/240VAC, 12 Surrette/Rolls 2V x 1766Ah, Hub10.3, Mate3, FNDC, RTS, OpticsRE. Tigo Energy ES maximizers on each PV module.

Westinghouse Solar: 30 (2x15) 235W panels with Enphase M215 microinverters. 6,450 nameplate watts AC, grid-tied.

Return to My OutBack Power System

Who is online

Users browsing this forum: No registered users and 1 guest