Lvd on outback inverter vfx3024

Discussion about OutBack Inverters in Marine Applications

Moderators: OutBack, OutBack Moderator Team

Lvd on outback inverter vfx3024

Postby Jimbob01 on Fri Feb 16, 2018 2:40 am

Hi all... new on this forum... just had a q regarding the outback vfx3024 i have:
When i set the lvd on the inverter to 24v the load stays on and
Keeps the batteries dropping... does the inverter run for a set
Period b4 it drops the load or have i missed something?

Many thanks in advance... James
Forum Junior Member
Posts: 3
Joined: Fri Feb 16, 2018 1:16 am
My RE system: Mstar mppt45amp x2
Outback 3kw inverter and 80 amp flexmax mppt
Trace 60 amp pwm
Sunpower 333w panels x 6 plus 3x 285w ja solar panels lithium batteries

Re: Lvd on outback inverter vfx3024

Postby Mike Curran on Sat Feb 17, 2018 4:44 pm

Should work. Here's a manual excerpt:
Mike Curran
Forum Czar
Posts: 528
Joined: Sat Aug 28, 2004 6:28 pm
Location: Chagrin Falls, Ohio
My RE system: Outback:
- 8 (2x4) Evergreen 180's into one MX60
- 6 (2×3) ALEO S79-300's into one FM80
- 2 grid-tied GVFX3524's classic stacked for 120/240VAC
- 12 Surrette/Rolls 2V x 1766Ah
- Hub10.3, Mate3, FNDC, RTS, OpticsRE. Tigo Energy ES maximizers on each PV module.

Westinghouse Solar:
- 30 (2x15) 235W panels with Enphase M215 microinverters, grid-tied.

Return to Marine Applications

Who is online

Users browsing this forum: No registered users and 2 guests