Outback stacking 120/240

Discussion about OutBack Inverters in Off Grid Applications

Moderators: OutBack, OutBack Moderator Team

Post Reply
yamill20
Forum Member
Posts: 10
Joined: Wed Sep 05, 2018 7:44 pm

Outback stacking 120/240

Post by yamill20 » Mon Dec 16, 2019 4:47 am

Hi friends and community

I have two outback GTFX 3048 Q4 2009
Connected to a Hub 10.3 with mate3s so I need help for stacking setting. In configuration manual says connect in port 1 and 2 for a split phase in this case with GTFX in case a VFX is por 1 and port 7.
My setting is a first por 1 and port 2 but the setting with mate not change to master L2 or slave L1 only says master or slave. In this case not function for split phase please help me....... :???:

User avatar
Kurt Lundquist
Alpha Energy Engineering
Posts: 1447
Joined: Tue May 31, 2011 7:23 am
My RE system: VFX3524, Mate3, 200Ah 24V AGM Battery Bank
Location: Arlington, WA

Re: Outback stacking 120/240

Post by Kurt Lundquist » Mon Dec 16, 2019 7:55 am

Set port 1 inverter to master and port 2 to slave. For the GTFX it doesn't say L1 or L2 in the stacking menu. If it still isn't working double check the Hub jumpers. They should be in position 4A of Figure 3 in the guide http://www.outbackpower.com/downloads/d ... _start.pdf

-Kurt
Kurt Lundquist
Renewable Energy Project Engineer
http://alphaenergy.us/

yamill20
Forum Member
Posts: 10
Joined: Wed Sep 05, 2018 7:44 pm

Re: Outback stacking 120/240

Post by yamill20 » Mon Dec 16, 2019 6:30 pm

Ok so in this situation the slave work to output 240?

User avatar
Kurt Lundquist
Alpha Energy Engineering
Posts: 1447
Joined: Tue May 31, 2011 7:23 am
My RE system: VFX3524, Mate3, 200Ah 24V AGM Battery Bank
Location: Arlington, WA

Re: Outback stacking 120/240

Post by Kurt Lundquist » Tue Dec 17, 2019 8:30 am

Yes the slave will provide L2.

-Kurt
Kurt Lundquist
Renewable Energy Project Engineer
http://alphaenergy.us/

yamill20
Forum Member
Posts: 10
Joined: Wed Sep 05, 2018 7:44 pm

Re: Outback stacking 120/240

Post by yamill20 » Fri Dec 20, 2019 12:26 pm

The mate says clasic slave port 2 and port 1 master but the clasic slave ranking power save move to 1 and master 0

yamill20
Forum Member
Posts: 10
Joined: Wed Sep 05, 2018 7:44 pm

Re: Outback stacking 120/240

Post by yamill20 » Tue Dec 24, 2019 12:48 pm

Already set and funtionaly thanks you

Post Reply