More water use lead-acid batteries under more load??

General Talk

Moderators: OutBack Moderator Team, OutBack

Post Reply
eesiason
Forum Whiz
Posts: 25
Joined: Fri Oct 12, 2012 9:40 am
My RE system: Off-Grid 48ea Sunmodule SW240, sunmodule 240W Modules, 18 SolarWorld 290W modules, 2ea Radian 8000W GS8048 48V 120/240VAC Inverter, 4ea Flexmax 80, MATE 3, Hub 10, 2kw Wind, 15kw ecogen.
Location: 648 Southbridge Rd., Warren MA
Contact:

More water use lead-acid batteries under more load??

Post by eesiason » Mon Jul 22, 2019 7:09 pm

Anyone know if I would expect more water vapor if I'm pouring more kWhs through my batteries (off grid system)?

I recently put in mini-split ACs, and we run them when the sun is out and it's hot. All five of them at once can add up to 6,000 watts steady load. A "normal" day's use is about 20 kWh, a hot AC day is 60+ kWh. 17,000 watts of solar on four FM80s and two Radians, so plenty of capacity, just wondering if I need to peek in the batteries more often.

PS, I bought the Mr. Cool DIY mini-splits and they are awesome. On a DIY scale of 1 (easy) to 10 (hard) they are a 3-.

Mike Curran
Forum Emperor
Posts: 1225
Joined: Sat Aug 28, 2004 6:28 pm
My RE system: Outback - Garage roof:
- 8 (2x4) Evergreen 180's into one MX60 (2007)
- 6 (2×3) ALEO S79-300's into one FM80 (2017)
- 2 grid-tied GVFX3524's classic stacked for 120/240VAC (2007)
- 12 Surrette/Rolls 2V x 1766Ah (2007)
- Hub10.3, Mate3s, FNDC, RTS, OpticsRE. Tigo Energy ES maximizers on each PV module.

Westinghouse Solar - Barn roof: (2012)
- 30 (2x15) 235W panels with Enphase M215 microinverters, grid-tied.

Outback Skybox - Barn roof: (2019)
- 14 (2x7) Talesun 275W
- 2 SimpliPhi 3.8 batteries, 48V, 150Ah total
- future AC coupled input from both rows of Westinghouse AC modules*
- future AC coupled input from 14 Talesun 275W, Enphase M215 modules*
* waiting for firmware update from OB

All self-designed and self-installed
Location: Chagrin Falls, Ohio

Re: More water use lead-acid batteries under more load??

Post by Mike Curran » Wed Aug 14, 2019 5:06 pm

Any time you're charging your battery you'll see more gassing but it's mostly hydrogen, not water vapor. It sounds like your PV is more than adequate to support your loads so it's not clear (to me, anyway) that your battery is getting discharged then recharged, but if it is cycling, you'll definitely see more water use. FWIW - Mike
http://www.tigoenergy.com/site.php?95b2dca2-ca6c
https://enlighten.enphaseenergy.com/public/systems/Hctc107221

larrywa
Forum Guru
Posts: 354
Joined: Thu Jun 25, 2015 11:25 am
My RE system: FlexPower Two
2 x GVFX3648s,
2 x FM80s,
FNDC w/3 shunts,
Mate3 v3.015.005 (works excellent!)
Hub 10.3,
PV:1000W east@45, 600W west@45, 2400W south@19 deg.
Battery:48v @ 130Ahr Crown batteries, deep cycle <$380 for 6.25kWh

ISY994i HA, Insteon, X10, Philips Hue, MiLight bulbs & RGBW strips
WebControl 8 as weather station stuffing
ISY994 variables via REST interface

Raspberry Pi3 x 2, Pi1 B+

Re: More water use lead-acid batteries under more load??

Post by larrywa » Fri Aug 16, 2019 11:51 am

Heat equals evaporation. When you force current through your batteries they heat up. If the ambient is hot, they evaporate more also.

Post Reply