Search found 26 matches

by Chrisserrant
Wed Aug 30, 2017 9:56 am
Forum: OpticsRE
Topic: Controlling the CC Aux Port
Replies: 13
Views: 7218

Re: Controlling the CC Aux Port

My FM80's Aux port doesn't change electronic state from OPTICSre or any Modbus register setting when not in the FM80's Physical AUX Screen Menu.
by Chrisserrant
Wed Aug 30, 2017 9:30 am
Forum: OpticsRE
Topic: Controlling the CC Aux Port
Replies: 13
Views: 7218

Re: Controlling the CC Aux Port

I see the same behavior at my site as EMCF explained. :shock:

Mate Firmware 3.015.005

1) Fm80 Firmware 2.001.000
2) Fm80 Firmware 2.001.000
3) Fm80 Firmware 2.001.000
4) Fm80 Firmware 3.001.000
by Chrisserrant
Fri Jul 28, 2017 6:30 am
Forum: OutBack
Topic: WattPlot poll
Replies: 11
Views: 7073

Re: WattPlot poll

Been using Wattplot pro for logging and system auto control from 2013. With great teachnical support.
by Chrisserrant
Sun May 28, 2017 12:37 am
Forum: FLEXmax Charge Controllers
Topic: FM80 - Producing less power with more sunlight?
Replies: 20
Views: 15039

Re: FM80 - Producing less power with more sunlight?

Also check that the cooling fan in the FM80 hasn't failed. As the unit will lower its production to protect it self from over heating. Just a thought
by Chrisserrant
Sun May 21, 2017 1:23 am
Forum: Mate3 / Mate3s
Topic: Mate 3 Firmware 3.15.5 update
Replies: 32
Views: 21431

Re: Mate 3 Firmware 3.15.5 update

Same result with 2 new 16gb sandisk cards. Thinking mymate might be defective ](*,)
by Chrisserrant
Sat May 20, 2017 9:41 pm
Forum: Mate3 / Mate3s
Topic: Mate 3 Firmware 3.15.5 update
Replies: 32
Views: 21431

Re: Mate 3 Firmware 3.15.5 update

Thanks for the feed back. I have flushed all my dns cash and browser history in both chrome and internet explore. Still no change also same on my mac bookpro i safari .Will try reflash the mate with different sd card
by Chrisserrant
Sat May 20, 2017 4:22 pm
Forum: Mate3 / Mate3s
Topic: Mate 3 Firmware 3.15.5 update
Replies: 32
Views: 21431

Re: Mate 3 Firmware 3.15.5 update

What versionof windows are you runing 10/8.1/7? Also what browser are you using?And last what version of java are you running?Also 64 bit or 32 bit windows?
by Chrisserrant
Sat May 20, 2017 6:05 am
Forum: Mate3 / Mate3s
Topic: Mate 3 Firmware 3.15.5 update
Replies: 32
Views: 21431

Re: Mate 3 Firmware 3.15.5 update

You should be able to access the the local web page of the mate by typing in your mates ip address on your network ito your web browser. ei googlechrome/ internet explorer
by Chrisserrant
Sat May 20, 2017 2:45 am
Forum: Mate3 / Mate3s
Topic: Mate 3 Firmware 3.15.5 update
Replies: 32
Views: 21431

Re: Mate 3 Firmware 3.15.5 update

Also it seems to have the same issue as 3.15.3 as local web page keeps saying loading. Also modbus still gives error as before
by Chrisserrant
Fri May 05, 2017 7:13 pm
Forum: Mate3 / Mate3s
Topic: Mate 3 Cannot Recover from Ethernet Outage
Replies: 122
Views: 127690

Re: Mate 3 Cannot Recover from Ethernet Outage

Just a FYI . As until release we dont know but the ne Rasberry Pi 4 suppose to be able to run windows.

http://www.itpro.co.uk/desktop-hardware ... foundation
by Chrisserrant
Wed Jan 25, 2017 12:18 pm
Forum: OutBack
Topic: FM40 Solar charge controller
Replies: 7
Views: 4785

Re: FM40 Solar charge controller

Thanks Sandra

Good to know
by Chrisserrant
Wed Jan 04, 2017 3:12 am
Forum: OpticsRE
Topic: System Partially Connected,
Replies: 10
Views: 5863

Re: System Partially Connected,

My system also started the partial connection in 28 December 2016. I haven't changed any setting on my network or outback system. Also running lates firmware 3.15.003 . :eek:
by Chrisserrant
Fri Dec 16, 2016 2:07 am
Forum: OutBack
Topic: Generator Charging doesn't get to "Parameters Met"
Replies: 8
Views: 5495

Re: Generator Charging doesn't get to "Parameters Met"

cgarai if I might put my two cents in. How tall are those batteries? if over 20 inchs like my own 32 inchs absorb will run till sun down and then also the next day. On the third day i will hit my charge paem met. As it takes a lot to mix the acid in tall batteries.
by Chrisserrant
Tue Dec 13, 2016 5:42 am
Forum: Mate3 / Mate3s
Topic: mate 3 firmware 3.15.003
Replies: 34
Views: 26056

Re: mate 3 firmware 3.15.003

Just an Update. After loading back 3.15.003 firmware and doing quite a few hard reboots by unplugging the cable from the hub to the mate. Leaving the mate unplugged for 10 mins at a time. The mate internal web has started to load and display properly in all browser (internet explorer, Chrome, Safari)
by Chrisserrant
Wed Dec 07, 2016 6:07 pm
Forum: Mate3 / Mate3s
Topic: mate 3 firmware 3.15.003
Replies: 34
Views: 26056

Re: mate 3 firmware 3.15.003

No worries. As yes couldn't get it to show properly in any other web browser. Also I use wattplot for logging locally on my own network to a pc which is a great program and fantastic support from the developer Andrew. As was running a Mate 2 for years without any issues like the mate 3 has presented...
by Chrisserrant
Wed Dec 07, 2016 3:58 pm
Forum: Mate3 / Mate3s
Topic: mate 3 firmware 3.15.003
Replies: 34
Views: 26056

Re: mate 3 firmware 3.15.003

Thank God I am not the only one as support made me feel so. If your using internet explorer try using compatibility mode as displays properly some sort. :shock: Would love to hear from others as I rolled back
by Chrisserrant
Sat Dec 03, 2016 5:47 am
Forum: Mate3 / Mate3s
Topic: mate 3 firmware 3.15.003
Replies: 34
Views: 26056

Re: mate 3 firmware 3.15.003

David please wait loading is on the mate 3 local web. Also in opticsre the Aux control have gone :roll:
by Chrisserrant
Fri Dec 02, 2016 1:46 pm
Forum: Mate3 / Mate3s
Topic: mate 3 firmware 3.15.003
Replies: 34
Views: 26056

Re: mate 3 firmware 3.15.003

the please wait screen never goes away on each page of the mate. Opticere is connected
by Chrisserrant
Fri Dec 02, 2016 1:42 pm
Forum: Mate3 / Mate3s
Topic: mate 3 firmware 3.15.003
Replies: 34
Views: 26056

Re: mate 3 firmware 3.15.003

Reloaded again now connects to opticsre but not whattplot
by Chrisserrant
Fri Dec 02, 2016 1:02 pm
Forum: Mate3 / Mate3s
Topic: mate 3 firmware 3.15.003
Replies: 34
Views: 26056

Re: mate 3 firmware 3.15.003

I went back to the 3.15.1 after 20 mins no connectivity
by Chrisserrant
Fri Dec 02, 2016 6:16 am
Forum: Mate3 / Mate3s
Topic: Mate 3 display of FNDC
Replies: 3
Views: 2516

Re: Mate 3 display of FNDC

Thanks for the response Blackswan but I know my batty soc compaired to voltage doesn't addup as got the batteries used about 5 years old and been just babying then till I can afford a new batch. But the question still remains when does that part reset I pointed out. As i hit charge parameters met tw...
by Chrisserrant
Thu Dec 01, 2016 7:35 pm
Forum: Mate3 / Mate3s
Topic: Mate 3 display of FNDC
Replies: 3
Views: 2516

Re: Mate 3 display of FNDC

After going through the mate menu was able to do a rest on the area in question. not reseting the mate or fndc.Just thought this would reset when charge parm met
by Chrisserrant
Thu Dec 01, 2016 7:28 pm
Forum: Mate3 / Mate3s
Topic: mate 3 firmware 3.15.003
Replies: 34
Views: 26056

Re: mate 3 firmware 3.15.003

Dont want to be rude but this update seems to be going backwards not fowards. As previouse versions wouldn't display the local web like this one. Hope local web wasn't built on a beta version of java.
by Chrisserrant
Thu Dec 01, 2016 6:28 pm
Forum: Mate3 / Mate3s
Topic: mate 3 firmware 3.15.003
Replies: 34
Views: 26056

mate 3 firmware 3.15.003

Is this new firmware for the mate 3 suppose to be uploaded to the device in a special way? As when I upgraded. Did the usual step and formated the sd card in fat32 and copied the files for the update to the card. Then plugged into the Mate 3 switched to update menu. All went well then tried to conne...